Due to a known issue with the design of the Ducky One2 SF (which IODINE boards are based off of) over-torquing of screws holding the PCB to the case can sometimes cause the case to bend slightly and therefore wobble on a flat surface when pressure is applied in the top right corner. Although all boards were checked for this known issue during our quality control procedures, we believe that extended exposure to cold temperatures during air transport may have created additional contraction pressure and caused the issue to present itself only after shipping.
Luckily, there is a quick and lasting fix which should entirely restore the board to its normal shape and function: Pick up the board with two hands, grasping side of the board which each hand. Firmly but gently “twist” the board very slightly, with the thumb of your right hand pushing away from you.
We apologize for the inconvenience caused, but please rest assured that we have worked with Ducky’s engineers to ensure this will in no way affect the performance of your keyboard and during normal use this issue should not return after being fixed with the procedure above.